CrossPoint Reader
crosspointreader.comI bought an XTEINK X3 (because I didn't want the touchscreen of the X4) a few months ago. I bought the X3 thinking, "This is a cheap tech toy; I'll play with it a little and probably forget about it."
As soon as I unboxed it, I put CrossPoint on it. ... Holy cow, I did not expect to actually use the X3 as much as I am. I'm getting through way more books now. Because it's just always there... Waiting in line for 5 minutes? Read. Sitting down at lunch? Read. It's so great!
And, the fact it supports KOSync is just amazing. Because then at night when I do my routine reading on a bigger/better ereader, all my book progress is synced up.
Anyway... The X3 with CPR is amazing.
> And, the fact it supports KOSync is just amazing.
I was excited by this and went through the effort to set up syncing, get the same books and KOSync support on my Kindle and phone as well, and... I don't ever use it because I just read on the X4 Pro all the time and haven't touched my Kindle in months.
I have much the same experience, surprised to love it as much I do. That said they have had issues locking down the firmware on their supply chain for the chinese market. They blocked the usb to the esp - which is defendable wrt to update mid e-ink refresh, but that also means a firmware with an error in its OTA will be end of the line. And I found it pretty confusing as to which model you're getting depending on which outlet you go through, which made me hold up on getting any news ones.
Buying through their own store or through their Amazon page should give you an unlocked flash path through the USB connection. I bought three (X3, X4 original, X4 Pro) and got three unlocked ones. Buying through Aliexpress might give locked version, which are still flashable OTA (and the newer ones through SD-card), which could be risky indeed if the bootloader gets mangled.
You might want to consider using Crosspoint's affiliate link to support the project (I don't have an affiliation myself): https://crosspointreader.com/devices
Last I followed up on it, the usb update was blocked on all of them, and the Chinese market model, the OTA restricts what you can install. For a period of time there was a workaround by intercepting its DNS resolution or something like that, but I wouldn't trust they won't lock it up behind a signature
I am not sure I understand: It's open firmware but not for the chinese market ?
For the Chinese market, they have a version where you can flash it with open firmware through their official firmware over Wifi or via SD-card. However with that version you can't overwrite the firmware through USB directly. It's risky because when you install a faulty bootloader, there is no recovery path.
I really have no idea why they made this choice specifically for that market. It causes a lot of understandable FUD.
If you buy the 'international version' through their store, you'll get a version that allows you to flash directly through USB, bypassing the bootloader entirely. There's also Crosspoint's affiliate link (I'm not affiliated) that leads to there: https://crosspointreader.com/devices
The regular X4 has no touchscreen. Only the newer 4 Pro.
And I agree, an X4 with Crosspoint is a fantastic reader. I keep it attached to my phone and I find myself reading instead of scrolling quite often.
You can also add the OPDS server from Project Gutenberg and download ebooks from that, though a way to search or even select a category or author would make it a lot better.
Just installed Crosspoint on my X4 Pro last night, and what a breeze! Amazing project. Very grateful to the maintainers
I love this project. Bought an x4 pro recently after being a bit skeptical and I've read a ton of books on it. Whenever I go to use my phone in a line or whatever I feel it magneted to the back and am reminded to read instead, something I never found myself doing with just the e-reader app on my phone.
One especially great feature of crosspoint is their sync service. It can mirror to my other existing self hosted service that has a kosync server already but also keep my progress pushed to hardcover so I don't have to worry about plugins on each device to do so.
I use an original X4 (USB C) with Crosspoint every day. Think I paid $50 for it. Great product, great software. It just works. The less features the better. My only regret is that I wish I had bought two since xteink switched to a pogo pin connector.
Print one of these. It makes the pogo pin connector much less annoying to use. https://www.printables.com/model/1816221-xteink-x4-pro-pogo-...
The pogo pin is awful. The product is better on every single could but the flakey pogo pin connector wipes all of that out for a worse product. It gets lost. It comes loose. It is just a terrible idea. Regret buying the upgrade.
Fwiw I agree but mine just lives in the dock at my desk. I have to charge the thing like maybe every couple weeks of heavy use. I did buy an extra one to throw in my travel backpack. So far not a huge issue for me and worth it to have the backlight and touch screen of the x4 pro.
Having said all that, an iteration on the x4 pro that adds back USB c and waterproofing would be an instant purchase.
I have the exact same situation. Really hoping they bring out the X4 Pro with USB C, that would be my dream device. My X4 is amazing though, except I occasionally miss backlight.
How does it charge if it has no usb-c ?
you use a pogo pin adapter that converts to usb-c
Love this project. It's better than a Kindle or Kobo in almost every way… with the important exception of buying/borrowing ebooks. The process is technical and annoying. I hope there is a better solution in the works.
How do you get newer books for this?
I'm a big user of Libby to borrow books, but it looks like they only support Kindle. I wonder if there are plans to enable library borrowing by open software like this.
It's not entirely straightforward, but you can legally get Libby books on crosspoint.
https://old.reddit.com/r/xteinkereader/comments/1vv1hhq/step...
Thank you! Also TIL Libby is just defaulting to not show epub because I always use Kindle.
CrossPoint + Xteink X4 = I haven't touched my Kobo in nearly three months.
Technically, the combo is worse on every parameter you would normally care about:
- screen size and PPI
- power of the hardware
- build quality
But the overall experience lets it punch far above its weight. I don't see myself buying a Kindle/Kobo-sized device ever again as long as these are available.
My wishlist for this class of product:
- Make the hardware robust to avoid cracked screens
- Keep USB C
- Use the thickness forced by this design to add a larger battery
- Provide a front/backlight
- Slightly more powerful hardware. Maybe the ESP32-S3
- Keep the device unlocked so the community can develop software for it instead of selling an "experience"
- Sub-$100 pricing
If the X4 pro had a usb-c connector it would be this. Sadly they made the terrible decision to use some flakey pogo pin connector
I only charge my device one every month or so. And transfer books over wifi using the built-in web server. So, the charging mechanism does not really matter so much. But it was a needless change.
Looking forward to using this when I get a S4 or Picco but I'm still holding off as it seems these small readers are moving quick. I'd like there to be a 300 ppi screen before I buy - at that size text clarity is very important for me. I think they're all around 220 right now.
But I suspect whatever the device, this will be a better, more straightforward OS.
You're right about clarity, with the X4 things are a bit limited because right now the font size is either too big for me (so not much text on one screen) or too pixellated to make for a good experience. Still, it's a nice reader, but I do miss more resolution.
CrossPoint was the main reason I decided to buy a Xteink X4 Pro. I bought it on Halloween sale. Actively seeking fonts for CJK glyphs that looks nicely on a (monochrome) e-ink display.
This is a great project. I tried it for the first time this past week while I was stuck in bed with some plague or other.
This was my first time using the XTEINK X3 and I really like the tiny eink form-factor.
Before anyone makes a purchase, I just wanted to flag that the X4 pro is almost the perfect pocket ereader for a vibehacker, with the major downside that it has a jank pogo pin adapter instead of a usb-c cable. If you can live like it is 2006 and have a single use dongle sitting around somewhere to charge the device or flash stuff to the device then it is perfect. The X4 regular is decent but the button layout is pretty wonky and it cannot mount as an SD card when plugged in.
Is there any good hardware in this open-source space? Can I get ahold of something with the display size/clarity of a paperwhite?
The devices list has good hardware from more consumer names like boox. I have the xteink and an older M5 screen that I am using this on.
I've not used a paperwhite, so can't compare but I am very happy with the devices I have and the open software they are running.
Pretty cool, I had no idea this existed. I definitely prefer this minimalist UI over something denser like KOReader's
Bookorbit users may find CrossInk-Bookorbit (https://github.com/agosez/CrossInk-Bookorbit) useful.
It is a fork of CrossInk (https://crossink.dev/), which itself is a fork of CrossPoint. It supports browsing and downloading books, and two-way progress sync with Bookorbit.
I use this on my XTEINK x4 and it's fantastic.
Not to be confused with the FidoNet reader CrossPoint [0].
[0] https://de.wikipedia.org/wiki/CrossPoint (sorry, difficult to find an english link)
Someone should package Anna's Archive as a preloaded e-reader.
My solution for this is shelfmark and a lightweight opds server. Works well enough so far.
I don't have that at the ready, but here are the 2500 most downloaded Project Gutenberg titles for offline reading in a zim file.
https://browse.community.library.kiwix.org/viewer#gutenberg_...