GENESIS

Programmable device, with modular sensors, radios, audio, motors, displays & buttons.

starter kit

from idea to running hardware

03modules

  1. 01

    ideadescribe what it should do

  2. 02

    firmwareStudio turns it into editable firmware

  3. 03

    plug insnap on the modules it needs

  4. 04

    uploadflash it to your Genesis — done

Genesis Mini

Genesis One

displays

round display

round display

square display

square display

rectangular display

rectangular display

plug in modules, upload firmware

visualise data and develop dashboards

what people are building

light music

light music

an led matrix that pulses to whatever's playing.

open in studio

audio fft analyzer

audio fft analyzer

live frequency spectrum from the mic, on screen.

open in studio

Displays

Displays

a live signal scope in the browser, from the adc.

open in studio

camera tracking

camera tracking

track your hand on the webcam and drive a servo.

open in studio

voice assistant

voice assistant

a mic that listens, transcribes, and answers back with ai.

open in studio

environmental sensor

environmental sensor

temp, humidity and air quality, served over wi-fi.

open in studio

program it how you like it

Axiometa Studio

Axiometa Studio

Describe any project you want to build, and Studio will generate the code for you. It's the fastest way to go from idea to a running sketch on your Genesis board.

START →

Arduino IDE

Arduino IDE

Don't worry, you are not locked-in every Genesis board works as a classic Arduino dev board, and AX22 modules plug straight into a breadboard.

START →

backwards compatible hardware

the genesis mini is an esp32-s3 dev board with full arduino support. the modules work with other boards too, so you're never locked in.