Retune·FM — Internet radio back on your Hi-Fi receiver

5 min read Original article ↗

Internet radio · restored

vTuner Internet Radio not working?
Restore it on Denon, Marantz, Yamaha and more.

Your receiver's radio,
back on air.

Free · No sign-up · No payment

When the vTuner directory became unavailable on many older receivers, thousands of Denon, Marantz, Yamaha, Onkyo, Pioneer, Harman Kardon, TEAC and other Hi-Fi receivers lost Internet Radio. Retune FM brings the full station list back — inside the receiver's own menu.

Denon Hi-Fi receiver playing internet radio via RetuneFM.com

Online player

Listen to radio online

Right in your browser — no receiver needed.

49 446

internet radio stations

🌐

Multilingual

interface in 10 languages

🔎

Search

by name, country, genre, quality

🔄

Weekly updates

the catalog grows every week

What happened

The station list didn't break. Its address disappeared.

Your device used to ask a company's server for the station directory. That service became unavailable on many receivers, so the receiver keeps calling a number that no longer answers — and the list shows up empty. Retune FM simply gives it a new, working address.

How it works

Three steps, about two minutes.

You change exactly one setting on the receiver — its DNS server. Everything else stays as you remember it.

Retune FM — how to set up internet radio on your receiver (video)

01Set

Enter the DNS

Open the receiver's network settings and put the Retune FM address below as the primary DNS.

02Open

Internet Radio

Go to Internet Radio in the menu, exactly as before. The directory loads again.

03Play

Press play

Browse by genre, country or language. Streams play straight from the stations.

Primary DNS address

62.132.3.28

Where do I type it? ↓

Compatibility

Will it work with your device?

Type your model. If it used the old vTuner directory, Retune FM speaks its language.

Not supported this way (they moved to a different service): Denon/Marantz from 2016 with an “H” in the name (AVR-X1400H and later, SR5012/6012/7012…); Yamaha MusicCast; Onkyo/Pioneer from 2016 (TX-RZ, VSX-LX…); Grace Digital; Logitech Squeezebox; NAD.

Setup · route A

Type it into the receiver

Note your current IP, mask and gateway, switch the IP to manual, type them back in, then put 62.132.3.28 in the DNS field. Where to go by brand:

Denon /
Marantz
Setup → Network → Connection → note IP/mask/gateway → set “IP Address = Manual” → re-enter them → in DNS enter 62.132.3.28 → Save
YamahaSetup → Network → DHCP = Off → note & re-enter IP/mask/gateway → set DNS (P) and DNS (S) both = 62.132.3.28 (not 0.0.0.0) → SETUP to save, then power-cycle
Onkyo /
Integra
Setup → Hardware → Network Setup → set DHCP = Disable → note & re-enter IP/mask/gateway → DNS Server = 62.132.3.28 → Save
PioneerMenu → Network Setup → note IP/mask/gateway → “IP Address” → Manual → re-enter them → in DNS enter 62.132.3.28
Table radios
(Roberts, Pure…)
No DNS field on these — use route B below, but note it changes DNS for your whole network.

💡 Tip: enter it in the receiver itself — then only the receiver changes and every phone or computer in your home keeps working as before.

SetupDHCPOff-IP Address192.168.088.018-Subnet Mask255.255.255.000-Gateway192.168.088.001-Primary DNS062.132.003.028-Secondary DNS000.000.000.000ProxyOff-Port00000Save
On the receiver, enter 62.132.3.28 as the Primary DNS, then Save.

Setup · route B — only if there's no DNS field

Or set it in the router

Only if the radio has no DNS field. This points your whole home network at our DNS, so use route A whenever the receiver has its own DNS setting. To do it: open your router (usually 192.168.0.1 or 192.168.1.1) and set 62.132.3.28 as the network DNS.

TP-LinkAdvanced → Network → DHCP Server → “Primary DNS” → 62.132.3.28 → Save
ASUSLAN → DHCP Server → “DNS Server 1” → 62.132.3.28 → Apply
KeeneticHome network → “Name servers (DNS)” → 62.132.3.28 → Save
Any otherLook for “Home network” or “DHCP” → the “DNS” field → enter 62.132.3.28 → save and restart the radio.
⚙️ Route C — for advanced users (Pi-hole, OpenWrt, MikroTik, AdGuard, pfSense)

Redirect only the radio domains and leave the rest of your traffic untouched. Copy the block for your system.

dnsmasq — /etc/dnsmasq.d/radio.conf

Pi-hole — /etc/dnsmasq.d/05-radio.conf

AdGuard Home — DNS rewrites

Final step

Check that stations are back

Power the receiver off and on (or reconnect it to the network), then open Online Music → Internet Radio. The list should come alive. If it's still empty, re-check that the address is typed correctly and that the receiver gets its settings from your router.

Pricing

Free to start. Fair to keep.

Every receiver gets 90 days completely free. After that the radio keeps playing — a small, voluntary donation just helps cover the servers and keep the catalog fresh.

First 90 days

Free

  • Full station directory
  • Genres, countries, languages
  • No account, no app

After 90 days

Donate

  • Everything above, still free
  • Never blocked — playback continues
  • Supports an independent project

♥ Donate

Activate

Enter your device code

Retune·FM is free and the radio keeps playing for good. After 90 days your receiver may show a short 6-character code — that's just your device id. Enter it to check status or, if you like, chip in for the server. Playback is never blocked.

Is this legal?

Yes. Retune FM only links to publicly available radio streams — no audio is copied or re-hosted. It is an independent project, not affiliated with any manufacturer or the former vTuner service.

Do I need to install anything?

No. You change one network setting on the receiver itself. There is no app, no account and no computer involved.

Will it slow down my other apps?

No. The DNS only redirects the old radio-directory address. All other services and streaming apps keep working normally.

How do I undo it?

Set the receiver's DNS back to automatic (or your router's address). Everything returns to how it was.