Kotinos: Finger tip shell mod for HSK Pro
STLs are provided, but if you wish to modify them you can edit the SCAD files. Additional BOSL2 library is required.
This project is open sourced with the GPL-3.0 license. The license conditionally allows for commercial use, modification, distribution, patent, and private use. Please take note of the license conditions before utilizing this project.
BOMs
| Part Name | Part Description | Quantity | Source | |
|---|---|---|---|---|
| 1 | Husk Pro | Mouse | 1 | G-Wolves |
| 2 | Kotinos | Main Shell | 1 | 3D Print Kotinos.stl |
| 3 | Index Paddle | Paddle for Right Mouse Button | 1 | 3D Print IndexPaddle.stl |
| 4 | Middle Paddle | Paddle for Left Mouse Button | 1 | 3D Print MiddlePaddle.stl |
| 5 | IDC Female Connector | 1.27mm pitch Mini dual rows IDC FC 10 pins Female | 1 | amazon |
| 6 | IDC Male Connector | 1.27mm pitch Mini dual rows IDC FC 10 pins Male | 1 | amazon |
| 7 | Ribbon Cable | 3cm length of 0.635mm pitch flat ribbon cable | 1 | |
| 8 | M1.4 3mm | Thumb PCB Mount | 3 | |
| 9 | M1.4 3mm wide head | Mounting Sensor PCB, Index PCB, and Paddles | 8 | HSK Pro |
| 10 | 6~7mm Skates | circular mouse skates | 7 |
Assembly Instruction
Customization
Edit the following files to suit your need
- DataHand.scad stores the hand measurement that dictates the paddle placement
- DataFingerPaddle.scad for paddle surface modification
- MainBuild.scad to render modules and edit module placements
