Researchers Develop Simple Modification to Improve Commercial Resin for Direct Air Capture

2 min read Original article ↗

The material also performed well under simulated industrial flue-gas conditions, where CO₂ is far more concentrated, capturing more than 50 percent more than the untreated resin. 

The team also tested the resin across temperatures ranging from 25 degrees Celsius down to -20 degrees Celsius and across a wide range of humidity levels. In humid air, the modified resin outperformed the original at every temperature tested, though its advantage disappeared in very cold, dry conditions.

Enhancing Durability

Sorbents used in DAC need to survive repeated use, cycling between capturing CO₂ and being heated to release it. Amine-based materials are known to degrade over time when exposed to oxygen. But the branched bPPI chains added by the researchers to the sorbent reduced oxidative degradation by about half.

In tests that simulated 150 rounds of capture and release from industrial exhaust, the modified resin held up significantly better than the original material, the researchers found.

“These commercial resins are already leading candidates for large-scale carbon capture deployment,” said Arkaprabha Giri, a former postdoctoral researcher in Jones’ lab who is the study’s lead author. “If we can meaningfully boost their performance with a process this simple, that’s a real opportunity to speed up deployment without waiting on an entirely new generation of materials.”

Study co-author Omid Ghaffari Nik, Ph.D., vice president of materials science and process at CarbonCapture Inc., said that bringing down the steep cost of DAC is a crucial goal.

“The U.S. Department of Energy has set a target of atmospheric CO₂ capture and storage at less than $100 per net metric ton, emphasizing the need for innovation in sorbent-based DAC systems,” Nik said.

The use of an existing commercial resin and readily available chemicals could offer advantages in eventually scaling up the process, the researchers said. They successfully applied the same method to a second commercial resin, Purolite A110, suggesting the approach isn't limited to one product.

The team has filed a provisional patent and is now working to extend the technique to other amine-based materials, with the aim of scaling the process from lab quantities to the industrial scale.

CITATION: Arkaprabha Giri, UnJin Ryu, Jiaqi Zhang, Opeyemi Ojelade, Wenyang Zhao, Jacob Hoffman, Mark Robertson, Jordi Espín, Madison Nichols, Surya Parker, Omid Ghaffari Nik, and Christopher W. Jones, "In situ azetidine polymerization elevates the performance of commercial polymer resin sorbents in carbon dioxide capture," Science Advances, 2026