Show HN: Offline ESP32 that displays a new QR code every 30 seconds
github.comThis is my first microcontroller project: an ESP32 that generates a new QR code every 30 seconds and displays it on an e-paper screen. The idea is to use it for proof-of-presence or location validation. The device is low power and stays completely offline — it syncs time via a GPS module and generates everything locally. I also built a backend service that verifies the scanned QR codes to check if they are valid. The web interface displays device locations on a map and allows adding new devices directly through the site. 30 seconds may be too long. It's certainly possible to snap a photo and share it with someone off site within a 30 second window. Yes, relay is possible, but I'm not sure if a shorter window solves the issue - you could stream your cam feed. Another option would be to limit the number of validations in the time window or to introduce a 'cool down' time - the next validation attempt has to wait 3 cycles to be valid. Relay would still be possible, but when the person on spot wants to validate for themself, relay could be more of a hassle. Last but not least, the browser could ask for the the location and calculate the distance to the device (location can be spoofed ..). A stream is generally of lower quality than a photo which should make it significantly more difficult to get a good scan of a QR code from a stream --- particularly if the code is changing every few seconds. I'd probably recommend showing a code for 3 seconds then a black screen for 3 seconds then repeat with a different code. Cameras need to focus on both ends and the stream has to be scaled to fit the available display parameters. Could easily turn into an exercise in frustration.