Hackintosh: OpenCore EFI for HP Pavilion Aero 13 Laptop
github.comHelp me on this. Do people really like say, macOS but not Apple hardware? Is this to lower cost? Just a hobby project?
All the above?
Forgive me. I've been on Linux since the 90s and don't really engage much with the Apple ecosystem. I don't mean this as a dig. I'm really ignorant on this stuff.
Apple hardware sucks for the following reasons:
- it's expensive, especially if you want to load up on memory or disk space
- there is limited choice
- it's relatively unreliable
- it's difficult to fix, you have to send it to Apple under warranty, third party repairs are difficult or impossible, self fix is impractical for most people
With Hackintoshes you can have a solid desktop machine starting from $150 (motherboard and processor). You can easily fix it yourself by swapping out parts and get local warranty. You can upgrade and downgrade at will. You can use a much wider range of macOS versions.
Laptops are a more complicated issue and much more marginal.
I've used a Hackintosh as my daily driver for about 10 years ever since I had the misfortune of trying to get my brand new MacBook fixed by a "genius" who was actually a rude, condescending arsehole who spoke nonsense. Apple applied the trivial fix of a replacement internal cable and then held my laptop for nearly a week as a matter of policy.
I'm very lucky apparently, my mid-2012 Macbook air is still my daily driver outside work. At the time, it was the longest battery life, reasonable CPU, ram and SSD, in the thinnest but robust and lightest laptop I could find at 13in.
I replaced the SSD a few years ago, and I don't think the battery would last very long nowadays, but I don't want a laptop on holidays anymore anyway.
I got fed up with osX though, just run Linux nowadays.
hackintoshes also support a killer feature that new Mac computers do not - nested virtualization
Can you describe how you use that with what software packages?
A few examples: using vmware fusion provides an option to enable nested virtualization
1) running a windows vm from macos, and inside that windows vm you enable and use WSL2 or docker desktop. Both of those windows tools require nested virtualization
2) run a hypervisor such as esxi or proxmox as the vm OS, which in turn launches vms. Handy for simulating infra.
3) run a macos vm and inside that vm, install docker desktop for mac
4) experiment with any qemu/kvm tooling inside a linux vm, such as multipass or kubevirt
Everything above is not possible on modern mac hardware but is on hackintosh
I want to say that's so cool, but why so manu vms are needed? Isn't possible to run all of this on hackintosh directly without VMception?
The ultimate setup is actually running esxi directly on the mac mini 2018 (6c/12t) and 64G DDR. Then esxi can launch as many macos, windows, linux and nested esxi vms as needed. 4 tb3 allows plenty of options for extra nvme or 10+ GbE nics. You can even passthrough the intel iGPU to linux and light up a monitor.
Compare to a modern mac mini has a strict limit of 2 macos vms, no hyperthreading , no nested virt and CPU optimized for vertical integration.
Thanks. I'm deep in the Linux world and really don't know anything about this stuff
In my case (and I suspect many others) the answer is Xcode. I develop native apps which means I need access to an iOS dev environment. iOS development is nearly impossible without Xcode, so the only way to do it is either pay a virtualization penalty (which is not appealing when Xcode builds already take a massive amount of time), have a specific machine just for iOS work (which would be super inconvenient, even with a virtual KVM), use a Hackintosh (which have problems), or pay Apples exorbitant fees for hardware.
I dream of a day when I can daily drive Linux and also do dev on iOS, but currently that’s not really possible without some unacceptable compromise. I’ve done quite a bit of research and have yet to find a viable solution (recommendations welcome).
This might not be an answer you like, but I find the virtualization penalty (running on proxmox [kvm]) to be acceptable. In synthetic benchmarks, the penalty is possible to measure but small (1-3% typically). Passing through a AMD graphics card and a USB port, I get a pretty good experience in using it and an excellent experience in administering it [backups/snapshots, restores, etc. are all super clean].
If I measure against "is it viable?", for me the answer is "absolutely, yes".
I ran a Hackintosh as my main computer between 2014 and 2022. Large part of the reason was cost: I was a student, so I didn't really have money to drop thousands upon thousands to get a Mac desktop. Even dropping like 1200€ on the cheapest MacBook Pro, which got me into using macOS in the first place, was a tough ask.
Another aspect was that the Mac desktop lineup wasn't great. There was the Mac Mini, which had a pretty limited chassis for any kind of expansion, not the best CPU options and ran on integrated graphics. Then there was the iMac, which had the same CPU I chose for my Hackintosh, but was significantly more expensive and came with a monitor that I didn't really need since I already had a good monitor. And lastly there was the Mac Pro, which was overkill both for budget and power, since it wasn't like you could spec it out with an i7 instead of a Xeon. The latest Mac Pro was also the trashcan, really emphasising how not great the lineup was.
With a Hackintosh, I could really just choose what parts I wanted, as long as macOS supported them in some way, and stuff as many SSDs and HDDs as I required over time, since it's not like my student budget expanded to having a separate NAS. And it'd be much cheaper than a comparable Mac, not that there were really any directly comparable ones. Performance-wise the iMac would've probably been the best one.
While it was a pretty superb system, especially for the money, it did get a bit tiresome to deal with the hacky nature of the system by the end of it. macOS updates would always be somewhere between "mild pain" and "large pain", so I did defer updates quite a lot. Sleep also stopped working at some point, so I often kept the computer running 24/7. And when Apple switched over to ARM, I knew that it was time to jump the Hackintosh ship. Thankfully by 2022, I had access to engineering bucks and had already acquired a NAS for my data storage needs, so I replaced my Hackintosh with the first-generation Mac Studio. A lot more expensive than my Hackintosh was, but a great computer nonetheless. Also dropped my apartment's total power usage by like 15-20%.
I've had a Hacktintosh from 2016 until end of last year.
Initially I just did it because I assembled a pretty good PC for gaming, but for work stuff I liked macOS more, so dual booting was a nice option!
This was also before the M-series chips, where you had to pay a hefty premium to get better Intel processors, and also (imo) Apple increasingly struggled with the heat produced by the chips.
Things got a bit more annoying a couple years later, when Apple had their fallout with NVIDIA and would not sign their drivers anymore, which meant I had to buy a cheap AMD GPU to use for macOS.
End of last year I changed a couple of components, including the GPU, in my PC and then decided the hassle with two GPUs was just not worth it for me anymore; so I bought a Mac studio.
I gained some and lost some with this transition. I'm no longer worried about major software updates, it's nice that I don't have to deal with complicated config files for the bootloader every once in a while, and of course there were some minor bugs too.
But I kind of miss the convenience of dual booting, with shared IO and drives. Now I need a network switch, USB-hub and have to toggle between monitor inputs. So yeah! Wasn't all bad!
Anyways, I think it's very cool that there is this community of people that write and maintain special bootloaders and drivers to make it all possible!
Yeah, in the head issue, the last work issue i9 MacBook I ever had was absolutely horrible... Would stutter and freeze up constantly under load and just become unusable as a platform.
It was nice in paper, but really needed to be undervolted and under locked... Not an easy task in a mbp. I couldn't get IT approval to buy a software to do it and didn't have local permission to load a self signed driver to do it either.
It was unusable for such a beast of a machine on paper.
I never really understood it either. And I'm someone who (only moderately successfully) used to run Linux on various Mac laptops. I had the opposite problem: I really really really liked Mac hardware, but was kinda meh on the OS.
I think in the mid-00s I could understand Hackintosh users to some extent. Mac hardware was (and still is) expensive, and OS X was a really nice, developer-friendly OS. But macOS has gotten more and more annoying and (IMO) developer-/power-user-hostile with every release. On the rare occasions I have to touch a Mac laptop these days, I find myself getting easily frustrated.
I think for the most part the reasons today are still due to cost. And maybe a little bit of the hacker spirit, just proving that something is possible. I would never use it, but if some folks' ideal is macOS on non-Apple hardware, and can make it work to their satisfaction, more power to them.
Maybe I'm just too rich to appreciate it these days but a, say, 1-year old used mac mini m2 looks like it can be snatched for around $499 on ebay.
The PC equivalent, probably a 2023 Dell Optiplex 7010, for instance, looks to be just about the same amount ($449).
Compare https://www.ebay.com/itm/364218215167 with https://www.ebay.com/itm/276266965157
I think we've hit the commodity price point market with used Apple hardware.
Again, maybe I'm just too rich to care about the $50 here but I thought the Apple premium has shaken itself off at least the used market.
>Again, maybe I'm just too rich to care about the $50 here but I thought the Apple premium has shaken itself off at least the used market.
On the base configurations /only/.
If you need a lot of ram and storage (neither of which are upgradable on modern macs, and in my experience storage being the most common component failure the idea of throwing away a computer because its SSD failed really grinds my gears) Apple is overpriced to an obscene point. Maybe less so in the used market, but high specced devices that aren't very old are less likely to be found there, someone who bought a 24GB mac mini with 2TB of storage isn't selling a year old model on the market unless they're doing something like switching to PCs and regretting their decision to buy a mac.
In fact it's highly likely that those only-a-year-old mac mini you can find on the market exist because someone thought they could make do with the base configuration and realized 8gb of ram is total garbage but using an Apple computer they're left with no choice but to buy a wholly new computer just to fix that mistake.
The base mini, brand new, is 699, which is a price I actually find reasonable for a computer with that level of performance and the nice form factor. But it only comes with 8gb of ram, which is abysmally unusable for anything other than "I browse facebook in one tab" kind of computer usage, and at the same time the rest of the computer is so good it makes no sense to sell this much hardware just to open facebook on a browser. So, you configure it for at least 16gb and now it's 929 euros. If you want 24gb of ram, it's now 1159 euros. Ouch. Stings. It's +460 euros just for an additional 16 gigs of ram, ridiculous, ram has never been cheaper than in the past few years, the same goes for SSDs, yet Apple prices their SSD like this :
512gb +230 euros
1TB +460 euros
2TB +920 euros
Wat? You can get a Samsung 990 pro PCI-E 4 with 4 TB of storage for 300 euros.
This is called a total ripoff.
> Maybe I'm just too rich to appreciate it these days but a, say, 1-year old used mac mini m2 looks like it can be snatched for around $499 on ebay.
Unfortunately, no. The dell has ram slots and two ssd slots. So a config with 16 or even 32 GB of ram and 2TB of storage is about $600. A mac mini has exactly none of these and costs $1600 with these specs.
And Apple knows this. They charge $200 for the ram upgrade precisely because they know the "base" config is so limited and just for marketing. The actual base config is $1000 with okay ram and non-crippled ssd.
There's a trillion other mini PCs for less from companies like Beelink and minisforum. And once you start equipping the Mac with a decent amount of RAM and storage the value quickly evaporates.
Like look at this: https://www.amazon.com/MINISFORUM-Mercury-6400MHz-PCIe4-0-Co...
For $400 you get a brand new system with 4 times the RAM, twice the storage. And it can be further upgraded down the line to more RAM and storage if you need it.
Now try upgrading that Mac mini's SSD and memory.
Now upgrade to 32 or 64gb of ram...
I could easily see someone preferring macOS to Windows, with how ad-ridden and pushy 10 and 11 have become. To me it would’ve been more understandable if someone preferred Windows back in the days of 7, which I liked even as someone who’s long been disinclined from Windows.
For macOS vs. Linux it’s more fuzzy, but there are still some ways the macOS experience is a bit smoother once everything is up and running, like dodging the tinkeriness of X11 and awkwardness of the transition from X11 to Wayland… for example, you’ll never see blurry XWayland windows because someone forgot to update Electron.
That said I haven’t hackintoshed in several years. It stopped feeling as necessary after M1 came out, with my reasons for doing so being lack of power and bad cooling endemic to late 2020s Intel Macs. These days I use real Macs alongside a custom built gaming tower running Windows and ThinkPad X1 Nano running Fedora.
I will say I love the touchpad experience in macOS... Nothing else compares.
I have an mà air for my personal laptop, still running macOS though.
I had to unwillingly sell my m1 MacBook Pro months ago because finding work has been a struggle and it came down to selling anything of value.
The only compute I had after that was an old thinkpad x270, dual core with 8gb memory.
I ran Debian with kde for awhile, but I like the macOS workflows and key bindings too much. I like the quality polished native apps folks build. I like homebrew casks, etc. It’s running opencore and Sonoma right now. For me, it was a way to get the OS I am productive in while no longer being able to afford the expensive hardware.
I fear that with Apple making their own arm chips now, hackintoshes are on numbered days. It’s only a matter of time before the OS no longer runs on x86_64 and they are already starting to drop support here and there.
I found it odd as well. macOS on non-Apple machines is clunky. I could see it as a hobby, but for the average user? It's likely trying to run Linux.
It is basically the same mentality as putting Ferrari logos on a Fiat Coupé.
Please explain.
Fiat Coupé vs Ferrari price, and what the owner would like to have.
Happy you are posting about hackintosh but generally sharing EFI folders isn’t at all best practice. Anyone who runs a hackintosh should learn how to build a proper config.plist with propertree for their own setup. Spread knowledge not scripts :)
Then OP would have 90% of their Github issues queue consist of "can't get XYZ to work" that's because something in the plist is broken and troubleshooting that can get very painful and annoying.
Any references to tutorials for said proper config.plist designs?
I think this guide is best when setting up a Hackintosh: https://dortania.github.io/OpenCore-Install-Guide/prerequisi...
For parts of the config.plist, you can find generators, but when installing on raw hardware you will probably be combining presets based on your system specifics.
I would say that after a decade of hackintoshing, an EFI folder for a specific piece of hardware I happen to have is a good shortcut compared to reading tutorials with wildly varying quality of writing, language, and, crucially, information, most of which just describe where you need to go and get ready-made pieces and put them into predetermined locations. In 90% cases, "this tutorial should have been a script".
The reason is twofold. First, tutorials are not "knowledge". They help you to get started, and then... You're on your own. Secondly, most hackintosh tutorials are not even that. Lots and lots of them are written by people who don't really know what they are doing and why. They put something together, they don't know how it works, but they rush to educate the masses nonetheless.
Mechanistically putting the exact bits of configuration into a file and stringing some files in a directory does not make you magically learn how any of this works.
Then again, I'm no CodeRush or usr-sse2 or vit9696 any other hackintosh star, but I've been tinkering with hackintoshes since 2009 and know a thing or two about how they work. However, I'm emphatically not fond of having to rediscover ACPI quirks of my machine on my own if someone else has done it, and done it better.
Once the thing boots and works at its best, I promptly forget all the bootloader and ACPI intricacies I needed to juggle to make it work, this is not how I do my computering. Which is why premade EFI directories are good IMO, once you know what they are made of and why. Bonus points if well-commented .dsl files are published next to .amls, of course.
Since OSX-KVM is out, though, I very happily confine my hackintoshing to a VM if I need it. With VFIO, you can even have accelerated desktop if it's what you fancy.
I'm confused, why are EFI folders unique in their need to be manually pieced together, as compared to pretty much any other of the thousands of subsystems on a computer?
Every machine differs and the quirks needs to be set on the bootloader for hackintoshes. So the bootloader configuration file and required drivers (kexts) are added directly to a folder in the EFI partition.
I have used this EFI folder for my own HP Pavilion Aero 13! It works for the most part! I even commented in some of the issues for that GitHub repo a few months back… However, I had issues with sleep/wake. This has been the common pain point for me when working with Hackintoshes. There are a lot of things that can break sleep/wake, and I rely heavily on that feature working without issue.
As much as I love Hackintoshes, they can be a huge time sink if you want 1-1 feature parity with an equivalent Apple product. It is not too difficult getting Hackintoshes to install and boot to the desktop in this day and age thanks to Dortania’s OpenCore guide and contributions from groups like Acidanthera. However, it takes far more time, effort, research, and trial-and-error to get small things working because there are so many different variants and situations to account for. Examples - Wifi/BT and Continuity features require cards pulled directly from a recent MacBook, or a Fenvi card, both of which no longer work with Sonoma without using OCLP / CPU profiles might need adjustment to account for battery life and performance issues / Intel SST was never used with MacOS devices, so any computers using Ice Lake Intel CPUs and Intel SST can’t have a working built-in microphone or headphone jack, etc. Reliability is a pain as well. Anything can break at any time.
At this point, I’ve come to learn that if you want a macOS device that just works, you are better off just getting a new Mac mini (desktop) or MacBook Air/Pro (laptop). I understand the arguments against this (high costs for specs, lack of repairability, intentional sabotage of repairs with third-party parts, used market is a gamble with ADE/MDM and iCloud locks, lack of customization with other computer components, etc). But I (fortunately) have never had issues with any of my MacBooks or Mac minis. And they have always “just worked” for my use cases.
Hackintoshes make for great fun projects where you do not rely on that computer for day-to-day operations. Though the ability to Hackintosh may soon be impossible with newer OS versions. It is only a matter of time since Apple is moving away from Intel x86 processors, which is part of what allowed Hackintoshes to be possible in the first place.
> As much as I love Hackintoshes, they can be a huge time sink if you want 1-1 feature parity with an equivalent Apple product.
Although this is broadly true it can generally be avoided by using proven hardware and premade EFI folders, which is what I've always done. I have no interest in spending time getting things working but there are many options available that don't require it. Most people in this boat are those with existing hardware who are determined to get it working.
> Hackintoshes make for great fun projects where you do not rely on that computer for day-to-day operations.
I run my Hackintosh 24/7 and it stays up for months on end. I've had very few unprompted crashes over the years. The reliability of the hardware is entirely based on what you buy.
> Though the ability to Hackintosh may soon be impossible with newer OS versions. It is only a matter of time since Apple is moving away from Intel x86 processors, which is part of what allowed Hackintoshes to be possible in the first place.
The Intel transition will have little effect on Hackintohses for now. Apple is likely to support their Intel products with updates until about 2030 and then you can keep using them for many years thereafter. Most people will be fine for at least 10 years.
I ran my old 4790K as a hackintosh for a couple years. I would up using a USB DAC for audio, but it otherwise worked for me as a desktop.
Wound up back in windows for a bit and now have been on Linux for a few years. Much happier just running Linux at this point.
I'm not sure how much longer it will be before Apple kills off x86 support altogether and a modern hackintosh is simply no longer an option.
I wish someone would be successful building a Hackintosh of one of the convertibles (or tablets) with Wacom EMR.
It kills me that Microsoft crippled styluses in Fall Creator's Update, and it annoys me to no end having to toggle Settings to allow my stylus to work in Macromedia Freehand (though yes, I'll admit that's better than having to run it in a penalty box).
I wish Apple would apin off their x86 OSX as a separate company.
I would love to see it compete with Microsoft Windows.
Every Christmas break I always hope I'll have the emotional energy to dig back into https://github.com/PureDarwin/PureDarwin#readme and see if I can get it to boot, even on VirtualBox, let alone some hackintosh friendly hardware like OP did
I am super, super cognizant that the devil's in the proverbial details, but they sure do seem to publish a lot of macOS into the open <https://github.com/apple-oss-distributions/distribution-macO...> so my interest is to map out the parts that are missing
I'm also aware that Darling exists (e.g. https://news.ycombinator.com/item?id=38423469 ) but if it's anything like Wine -- no, thank you. The only reason Wine (and their CrossOver friends) are required to exist is because there's no suitable open source release of Windows, so emulating the bugs is glucose cheaper. I had high hopes for ReactOS when I was in college, but I think they're just pushing that rock uphill (although I am super glad the project exists)
Having said all of that, don't overlook that even if I snapped my fingers and had a PureDarwin built 14.3 .iso this very second, the supply chain for x86_64 applications for any such OS is likely going the way of the dodo, since it won't be in a vendor's best interest to dedicate resources to building releases for what they assume is a dead platform
Why? To decrease their hardware market with own hands? Never going to happen.
Apple is not very frequent in self-shooting in the foot.
They’re really a hardware company that builds appliances.
Microsoft is a software company that builds some hardware.
They’re coming from opposite directions.
> They’re really a hardware company…
Nah, they're a software company that builds physical runtimes.
"People who are really serious about software should make their own hardware." — Alan Kay
How much longer do you imagine x86 will be supported, given how much better Apple Silicon is in every metric?
According to https://support.apple.com/en-us/HT201624\
It seems they consider hardware obsolete 7 years from availability to purchase. Intel mac pro was selling last year so sometime around 2030?
Likely Apple will stick to their usual support cycle of "Current minus N" and eventually x86 will be dropped
As someone who uses macOS for 11 years as the daily driver for his work, I can just say that it would be a bloodbath.
Not only is the driver support abysmal, kext are gone, and the actual quality of macOS has declined significantly over the years.
10 years ago, there was the rule of thumb to wait one update before you do the “big” OS upgrade, now it's better to wait for 3–4 updates as Sanoma crashes on our working machines (1500 people company) frequently.
Speaking of crashes, my m1 MacBook Pro 13, still running Ventura, has crashed more than ANY OTHER mac before. And I'm talking about crashes like, you close the lid, drive to the airport, take a seat, open the lid and just see that macOS starts completely fresh and presents you with a system crash message.
And this is the first Mac where I don't use any kext, strange tools, and completely abandoned software development…
The only thing that let me keep the m1 is the battery life...
Try creating a new user profile (keeping the old untouched). I had the same problems on my M1 MBA and assumed complex hardware or OS issues. But all problems are gone on the new profile (still existent on the old one when used). Strange.
On the topic of Hackintoshes: They are becoming more and more obsolet with Apples focus on Apple Silicon, Neural Engines and so on. Not spec or price wise, but regarding feature parity and Apples OS support for the Intel architecture. Lots of old „Hackintoshers“ abandoning the hobby.
It's interesting as my M2 machines of which I have two, have never crashed on me once. However, I'm very choosy about the software I run on them, and the said software doesn't do weird bollocks like trying to extend builtin frameworks with plugins. I mean, those are not weird bollocks per se, but Apple seems to be actively abandoning any and all effort it has done to make their own stuff (for example, Mail) extensible. So be it. One day I'll surely flip them a bird as I install Linux on my remaining mac.
Wonder if your M1 might have a hardware defect lurking, though — the vast majority of kernel panics on real macs come from hardware malfunctioning.
Why would they want to encourage people to buy x86 machines from vendors other than them?
Not that they would encourage people to buy machines from anyone but them, but, for x86, at least they don't make any machine with those chips anymore.
In a couple years they won’t make any software for those chips either
Lure a wider class of people into buying things from the App Store to generate more recurring revenue? Make macOS a more promising alternative to Windows in the corporate space?
Last time I checked it's not like they have excess inventory. And Macs are quite viable in the corporate space - so far, in the past 10 years or so, I have been issued precisely one Windows laptop. All other machines were Macs.
For tech and art, yes, that's been a solid Apple domain for decades. But your average paper pusher bureaucrat? They get a crap 500$ Dell/HP that constantly has issues because there's no budget for better stuff and 90% of the non-Web/SaaS software in that area is solid Windows-only.
From my past couple years, I only saw Windows laptops in accounting and HR. You could get a Windows loaner when you needed to check something a customer was experiencing you couldn’t reproduce on the Mac.
Linux has been rare mostly for compliance and regulatory issues - corporate IT thinks it’s too easy for a determined Linux geek to take over the machine and bypass all safeguards.
> Linux has been rare mostly for compliance and regulatory issues - corporate IT thinks it’s too easy for a determined Linux geek to take over the machine and bypass all safeguards.
And that's because it is... when Grub boots, press e, add init=/bin/sh (or rdinit), and boom you have a root shell. In case the admins did think far enough to deal with implementing Grub password protection or secure boot of some kind, wait a couple months, and there will be some sort of local privilege escalation exploits (there's about one a year).
In addition to that, Linux doesn't exactly play nice with corporate snake-oil solutions - these are more hassle than they're worth it as they constantly break.
> 500$ Dell/HP that constantly has issues because there's no budget
So they wouldn’t buy any macOS licenses unless they are <$50 either? Which makes it totally not worth it and would result in a significant decline in revenue for Apple
Of approx 5,000 employees there are less than 20 Macs at my workplace. We're a Dell/Windows shop with Ubuntu as a popular option for devs.
Outside of the tech departments staff usually get generic corporate hardware for light desktop/browser workloads.
The point isn't that there are many shops that don't really do Macs. The point is that there are many that do support Macs. It's pretty common in tech-company circles, at least. That's not everything, but it proves it's not weird.
Of course, most companies aren't going to spend on a Mac laptop; a $500 Windows laptop (or whatever) is usually good enough for many roles.
They would probably earn more money from selling those 20 macs than 200+ official hackintosh licenses.
They would cannibalize their hardware products and with the massive margin (especially on upgrades) that’s not worth it at all. The App Store revenue is peanuts (on macOS but I would assume on iOS as well relative to hw sales).
> I wish Apple would apin off their x86 OSX as a separate company.
They tried to do such a thing with IBM back in 1995-96. Didn't work out.
I can't believe it